VCM metal clad plate
- Description
- Product introduction on the left
-
Yuzhitutu series VCM metal-clad boards are made by thermally coating plastic film and metal sheets through an automated production line. The base metal sheets are mainly galvanized sheets, galvalume sheets, stainless steel sheets, and aluminum sheets.
Optional, with a variety of surface film colors to meet various customer needs.
Customized Solutions and Quality:
Substrate Material: According to customer requirements
Surface Film Color: According to customer requirements, thousands of colors are available
Substrate Thickness Range: 0.3mm-1.2mm
Surface Film Thickness: 0.16-0.20mm
Width Range: ≤1250mm, customized according to customer requirements
Minimum Order Quantity: 3000m per color
Product Characteristics:
1. Easy to Shape Yuzhitutu series VCM metal-clad boards have good plasticity and can be processed using various forming techniques such as rapid stamping and bending according to customer needs.
2. Pollution-Free
Yuzhitutu series VCM metal-clad boards are completely dry-process during construction, all materials are recyclable, and no pollution or construction waste is generated.3. High Efficiency
Yuzhitutu series VCM metal-clad boards are convenient and quick to install and use, and are not affected by environmental seasons.
4. Moisture-proof, Insect-proof, and Fire-resistant
As a high-quality metal material, Yuzhitutu series VCM metal-clad boards perfectly solve the pain points and difficulties of traditional materials that are afraid of water, fire, mildew, and insect infestation.5. Acid-resistant
The base metal of Yuzhitutu series VCM metal-clad boards has good corrosion resistance, and the outer film has both corrosion resistance and acid and alkali resistance, so it has excellent chemical resistance.
Customized Solutions and Quality:
Substrate Material: According to customer requirements
Surface Film Color: According to customer requirements, thousands of colors are available
Substrate Thickness Range: 0.3mm-1.2mm
Surface Film Thickness: 0.16-0.20mm
Width Range: ≤1250mm, customized according to customer requirements
Minimum Order Quantity: 3000m per colorYuzhitutu series VCM metal-clad boards have passed the stringent tests of our provincial engineering research and development center, ensuring the highest quality standards in the industry. The following are the test parameters of our product laboratory.
Serial Number Test Item Judgment Basis Experimental Phenomenon Whether it Meets Requirements 1 Appearance The surface of the clad board should not have obvious bumps/scratches/stains, uneven color, repair marks, etc. No obvious bumps/scratches/stains, uneven color, repair marks, etc. Compliant 2 Pencil Hardness The scratch hardness of the surface of the clad board reaches the HB pencil hardness test standard (pencil method) HB Pencil Hardness Compliant 3 Film Surface Adhesion Draw 100 1mm*1mm grids on the board, stick transparent tape on the grids, and then pull off the transparent tape. No peeling should occur. No obvious peeling marks Compliant 4 Heat Resistance Place the clad board sample in a constant temperature box at 130+10'C for 3 hours. No abnormalities should occur. No obvious phenomenon, no blistering, no peeling, surface scratch resistance Compliant 5 Hot Water Resistance Place a 50*50mm sample in 70'C warm water for 200 hours, observe the appearance changes, compare the glued and unglued sections, and ensure no bulging, etc., and the color difference ≤30 Soaked in 70'C warm water for 200 hours, no bulging, no obvious appearance changes Compliant 6 Boiling Water Resistance Place the sample in boiling water (above 95'C) for 3 hours. There should be no wrinkles, cracks, expansion, or paint peeling. No blistering on the surface, no obvious difference in appearance Compliant 7 Acid Resistance Place a 50*100mm sample in 10% 20C hydrochloric acid for 5 hours, then rinse. Apply rust inhibitor to the exposed metal surface and ends within 5mm. There should be no rust, contamination, or discoloration. No appearance changes, no foaming Compliant 8 Alkali Resistance Place a 50*100mm sample in 10% 20'C sodium hydroxide for 5 hours, then rinse. Apply rust inhibitor to the exposed metal surface and ends within 5mm. There should be no rust, contamination, or obvious discoloration. No appearance changes, no foaming or discoloration Compliant 9 Self-extinguishing A 10mm*150mm sample, with the coating facing down, is tilted at a 45° angle and heated from below with a 25mm flame for 20 seconds. Remove the flame, and it should extinguish immediately. Extinguished immediately Compliant 10 Salt Spray Test Place the product in a neutral salt spray test chamber for 1000 hours (test temperature 35°C) after placing a gasket. No penetration, blistering, or film peeling should occur. The central area is intact, no abnormalities. Whether it meets the requirements Compliant 11 Surface Film Thickness 0.18±0.1 mm 0.17936mm / 12 Bending Property 180° bending, no peeling should occur No cracking or peeling occurred during either vertical or horizontal bending. Compliant 13 Cupping Test Draw a 3mm*3mm grid, observe the cupping until the film starts to peel, and record the cupping height. Cupping height 8mm, no abnormalities. / Product Application Cases
1. Decoration and Renovation
Application range: High partitions, wall panels, ceilings, kiosks, garages, ventilation ducts, etc.Using Youzhitu series VCM-coated steel sheets for interior decoration not only solves the problems of indoor pests and mildew once and for all, but also makes the building more modern, meeting the aesthetic requirements of modern people.
2. Furniture
Application examples: wardrobes, bathroom cabinets, shower rooms, dining tables, coffee tables, clothes boxes, file boxes, bookshelves, stainless steel trash cans, office cabinets, etc.
Metal cabinets made with Youzhitu series VCM-coated boards have excellent moisture-proof and mildew-proof performance, and because the surface is processed by high-temperature coating technology, it can be washed directly with water, and will not
get moldy, and is easy to install, so Youzhitu series VCM-coated boards are widely used in integral shower rooms.
3. Doors and Windows
Application examples: rolling doors, security doors, garage doors, interior doors, door frames, window frames, etc.Metal steel doors processed with Youzhitu series VCM metal-coated plates are a very popular type of door now. This type of door has over a thousand colors
and patterns to choose from, and can also be customized with patterns, perfectly matching various styles of home decoration. In addition, the metal-coated doors will not deform,
crack, or corrode, and have a high cost performance for home decoration.
4. Home Appliances
Application examples: televisions, refrigerators, freezers, washing machines, air conditioners, electric fans, lighting fixtures, sterilizers, solar water heaters, electric water heaters, etc.Youzhitu series VCM metal-coated plates have a beautiful appearance, excellent processability, corrosion resistance and many other superior properties, and are also a material that is now sought after by the home appliance industry.
-
The Youzhi Tu series VCM metal-clad panels are made by thermally laminating plastic film and metal sheets using an automated production line.
Product Consulting
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Contact Us
National unified service hotline
400-161-3388
No.6 (F1-F9), Residential Quarter B, South of Leping Town Central Science and Technology Industrial Zone Planning, Sanshui District, Foshan City, Guangdong Province
Powered by www.300.cn | SEO Tags | Privacy Policy